Laying soft tile

The simplest such process as laying soft tile - Tiles with self-adhesive layer and protective film. Before mounting the protective film is peeled off, and each shingle mounted on the base with nails with broad heads. Sunlight is bonding the bottom surface of the tile to the base and the neighboring tiles.

Laying soft tile and has high rates - two qualified installer per day can cover the tile roof house of average size.




The approximate cost of material and accessories, depending on the size and roof pitch is usually indicated in the tables prepared by the manufacturer. The share produced in the process laying waste usually does not exceed 5-10% of the total amount spent tiles. Mounting method depends mainly on the quality and shape of tiles, roof pitch angle and base material.

Roofing tiles made of soft, but the main material, also provides a large number of accessories and components. This roll materials for the device lower carpet, cornice bands, roofing nails or hooks, ridge elements with vents, vacuum fan (for ventilation of the roof structure and upper floors), vent pipes, etc. At the same time, most quality of bituminous materials supplied the market in the form of finished assembling sets with proprietary systems, sewers and other accessories. Therefore, the correct laying soft tile of a particular model and details of the installation can tell just who are familiar with the technical recommendations of the manufacturer and detailed maps of the installation works. However, there are recommendations for all materials of this group.

Shingles can be installed on roofs with a slope of 12 to 90. Individual producers in the technical documentation indicate that the installation of their products is possible at any angle - until the negative. In this case, the main condition for high-quality styling - having the right configuration and design documentation.

Standard is considered to be the following components: Konkovo Cornice-element (with him begins and ends with their installation); coating valley - roll of bitumen-polymer material with reinforcing the basis of polyester (for internal fracture of the roof - the so-called valley, as well as adjacency to roof vertical surfaces of walls), special galvanized roofing nails, asphalt mastic (for sizing particularly problematic places - eaves, valley edges, when laying a carpet underlay), carpet underlay (bitumen-polymer based on glass fiber or polyester). In addition, the box should contain the metal components (plates, preferably with a polymer coating) and roof ventilators (devices, allow ventilation underlay space). All components must be the color of the roof.

Mounted shingles on a solid crate - waterproof plywood, oriented chipboard or tongued, cutting, edging the board. But there are exceptions, some types of shingles can be laid on the step-crate.

In a separate waterproofing and strengthening of internal kinks need a roof. They reinforce the special carpets for valley (supplied in rolls).
Humidity base material should not exceed 20% of the dry weight, and joints of boards must be customized to places supports. The length of the boards themselves - at least two spans between supports.