Reason for the buildings the firm Walton Garden Buildings

We represent you unique development Walton Garden Buildings. This design will help you save time and solve the problem of the device base. The base is available dimensions 1,8 m x 1,2 m, 2,1 m x 1,5 m, 2,1 m x 2,1 m, 2,4 m x 1,8 m, 3m x 1,8 m and 3m x 2,4 m.

The geometry of the foot should correspond to the size of your floor buildings. Construction is set to ground (a lawn or soft ground) with steel bars. If the foundation is established on solid ground, are used brackets to compensate for uneven surfaces.

Buying a summer house, you should decide in advance on what basis it will be installed. Mainly for dachas lay the following types of foundations:

1. Monolithic concrete foundation.
2. Foundation and slab
3. Wooden beams

It is obvious that the monolithic slab foundation and time-consuming and expensive. Beam significantly cheaper, but is only suitable for solid and smooth the soil and small buildings (1,8 m x 1,2 m, 2,1 m x 1,5 m)

Reason for the buildings the firm Walton Garden Buildings has the following advantages over traditional foundations:

- Easy and quick assembly
- Easy to install
- Requires a minimum of tools and skills
- Does not require the preparation of concrete mix or installation of prefabricated panels
- A minimum of excavation
- Secure attachment to the soil, which may not provide the foundation girder
- Processing of impregnating against decay (10 years warranty)
- Easy adaptation to the size of buildings



On the video shows examples of setting the base to the lawn and on solid ground.

Recommendations for the installation of foundations for dachas

Make a foundation for the country house of their own forces to any person, is perhaps even alone, but of course it is more convenient and easier to do it alone, more than a team, the work will go better.

First, you need to determine the location of your building:

- Decide on the venue and bringing up storage materials
- To evaluate the surrounding terrain (possibly near some young trees that will grow, the need for a place in the future, etc.)
- Take into account the illumination of the site
- View from the window (for house)
- Take into account the connection of electricity

Types of foundations

Naturally it is necessary that the ground was smooth and durable. Pliant foundation can lead to skewed walls and jammed doors. We consider three types of foundations:

- The foundation of the plates
- Monolithic reinforced concrete foundation
- The foundation of the beams

To compare them with the basis for the firm's buildings Walton Garden Buildings

With either method, we strongly recommend running a foundation in proportion to the contour of your building. In this case, the rainwater will drain freely from the roof and the walls, bypassing the base on the ground, and would have no problem with podgnivaniem the bottom of the building.

Monolithic foundation

To perform the work required tools: stakes and rope, a shovel, broom, concrete mixers, stretchers, graters, mortar level. Materials: sand and gravel and cement.



Methods of the monolithic device foundation presented in the following clip, as well as in the walkthrough:

Step 1. Choose a location to house, taking into account the easy approach to all parties. Perform a breakdown of the basement with the help of pegs and ropes. Promerte diagonal for precise right angles.

Step 2. The thickness of the base plate 15cm. Foundation can be flush with the ground or above it. Level the ground, cut too much. Remove the pegs.

Step 3. Install and align the wooden formwork. Check the diagonal for precise right angles. The level set horizontal line casing. Fix the shuttering of steel crutches. Perform the preparation of the sand. Perform the preparation of polyethylene film.

Step 4. Place the tabs on the reinforcing mesh. Then knead concrete using one part cement to five parts of sand and gravel. Add water to the mixer in small amounts to concrete was not too runny.

Uniformly fill the formwork with concrete. Level the surface of the float.

In rainy weather, Nestle surface with plastic wrap. If the weather is dry, it is necessary to moisten the surface to prevent cracking (eg, wet cloths to hide)

Foundation and slab

To perform the work required tools: stakes and rope, a shovel, broom, concrete mixers, stretchers, wooden hammer, builder's level. Materials: sand and gravel, cement, road plates.



Step 1. Choose a location, follow the breakdown.

Step 2. Remove the top layer of soil. On marked path Delve at 7,5 cm Level the surface and remove the pegs.

Step 3. Knead one part cement and eight parts of sand, and follow the preparation of a thickness of 4 cm

Step 4. Tiling follow through the construction level and mallet.

Step 5. Perform final test with a long rack, compare to check the diagonal angles. Remove from the foundation rubble and sand.

Foundation of the beams

To perform the work required tools: pegs and ropes, shovels, brooms, wooden hammer, builder's level. Materials: sand and gravel, cement, beams, 75mm x 75mm.

Step 1. Choose a location, follow the breakdown.

Step 2. Remove the top layer of soil. On marked path Delve at 7,5 cm Level the surface and remove the pegs

Step 3. Perform the preparation of the sand and gravel mixture and carefully align the tamp.

Step 4. Place the beam on training. Foundation beams should lie perpendicular to the joists bearing subfloor. With the building level and mallet align the beam.

In addition to these basic foundations can offer an alternative device types of foundations - ekofundament.

Ekofundament

Step 1. Select and prepare the surface for the device ekofundamenta.

Step 2. Cut out the vapor permeable membrane size.

Step 3. Install sections ekofundamenta in the design position and secure them connecting elements, which included ekofundamenta.

Step 4. If necessary, trim the extra sections, such as a hacksaw. Fill ekofundament gravel. Contour ekofundamenta better do a little more loop structures.