Has become a tradition to spread the walls in the flat tiles. It turns out that the process of cladding tiles is not so complicated as it seems at first glance. Now very wide choice of tiles, so choose the tile rather more complicated than it lay. In this article we will discuss step by step process of cladding tiles.
For a start it is worth noting that the walls in the room are very rarely, parallel to each other, so when facing the entire room should not be taken for the wall guides.
If you want to ease the process of lining, it is better to use a mosaic tile. It is a sheet of small tiles, so for once you can paste several dozen tiles. If you decide to use regular tile, you will have to follow the following steps.
The first step is to attach to the wall of the horizontal rails. Advance make marks on the wall and nailed to her plank with nails. Hammer in nails need so that later they can be easily pulled out.
Then the corners are doing vertical guidelines necessary for putting some vertical row.
From the angle formed by the vertical and horizontal guides to start a special comb to apply the adhesive with a spatula.
Then proceed to the immediate cladding. Push the edge of the tile to the horizontal guide, and aligning its other edge of the vertical bar, push the tile to the glue. To create smooth joints using the inserts in the form of crosses. We spread the entire horizontal row.
In the same way lay out all the other series. After that, remove the vertical direction, now in their place to put end tiles, which have cut it. Do it better not to hand cutter and a special machine.
After the tile is laid out, proceed to putty joints.
No comments:
Post a Comment