When it comes to install a second door in the apartment, many people choose doors outposts of the Russian production. The doors of this brand is well recognized for their high level of burglary, operational reliability and attractive design.
By purchasing the doors, most customers bought not only the door itself, delivery, and services for its installation. However, if you can mount the door on their own. In order to correctly perform installation of doors on their own, should be guided by the recommendations of the manufacturer and strictly observe the sequence of operations.
First of all, make sure the principal possibility of installing a concrete doorway, you need to do as accurately as possible to make measurements. If in the doorway before the door has already been installed, the old door to be removed. When dismantling the need to act fairly careful not to damage the laid electrical and telephone cables, and wire intercom.
Preparation of the opening - a process that includes a variety of operations. Depending on the state of the opening may require cutting of the old foam, or dislodging the old plaster. If there are elements of the old fixture (metal pins, screws, etc.), they should also be removed from the opening. In the houses of some series in the openings have concrete quarter or slopes to remove them have to work with a sledgehammer.
Preparing an opening, you can start assembling the doors. Doors installed in the doorway, taking into account which side will open the door. Frame in the doorway should be placed very precisely, for the proper execution of this operation, use the level or plumb. Fixing the frame with punch in the wall of bore holes for anchor bolts or pins.
After plugging each pin check the position of the frame with a level, so you can avoid possible biases. Then set the door leaf and accessories. When the installation is finished doors should be checked and adjusted all the nodes, and only then fill the space between the foam frame and the wall.
No comments:
Post a Comment