Well, then, to approach the final, but no less interesting part of the saga of the construction of toilets. Read?
As you may remember from previous installments - it is left for the roof. At first, I planned to make it out of something like sheeting. Therefore, without thinking twice (it's one of my sins, because I think to possibly longer), I made the lathing lath 50h25 via rail. For such a corrugated sheathing is enough.
Later, however, persuaded me (or rather, I'm pretty easy to let himself be persuaded, because he already inclined to such an option) that the soft top would look more profitable, and in general. What to do - went for the soft roof, at the same time bought a roll of tar paper and the finest veneers.
But then came the full farm: Vanya decided, in order not to make a solid crate, modify an existing one. This was done as follows: the crate beds and attached roofing material, and the top is attached plywood, which will be stowed soft top. As a result, a thin veneer was protected on two sides, which seemed to me perfectly acceptable solution in terms of increasing the life of the structure. Kind of design - in the photo.
Then, in fact, was started by laying a soft roof. Particularly interesting in this process nothing but laying the part that refers to the speaker spire - that was there that I run and sweat is nice, because radius of the spire is quite small, and beautifully arranged on it a soft roof was not easy.
Well, in the end, kind of a toilet with a completed roof. In the future, will hem overhangs, make interior and exterior. However, this is not a priority. I would be happy if my form still unfinished construction spodvignet any of the readers to new feats of labor
Good luck on the construction site!
No comments:
Post a Comment