Construction budget of the fence

When in the country all doing their own hands, quietly, quietly, accumulate all kinds of building materials. Construction is over, and throw a pity, and so each time.



Maybe things gradually and would throw out, only here there is a safe shelter - a garage, or "bins homeland" in the depths of which razed much of what has long and happily forgotten.


All forgotten me, but not mother-and wife! And after narrowly "Persuader" I gave up. Nowhere to go, had to build a fence.

"Zakroma homeland"

To begin, I got into the garage and into the world learned:
- 20 meters of galvanized mesh
- 7 pillars of the 63rd tube
- Two sheets of corrugated board on 6 meters,
- 200 kilograms of various valves,
- 200 liter barrel of cement.


Budget fence

In order to make the fence to the desired height of the grid, or corrugated board lacked material. Therefore, as a result of calculations and measurements in order to save, I decided to make a combined intake of nets and sheeting. Missing quantity of material had to buy.

First of all, I reinforced concreted basement 800h250 the entire length of the fence, to a depth of 40-60 cm (the difference due to hillside). But pre-installed in the formwork pillars of the pipes. Cap reinforced with four bars, two top and bottom.



Until the cap was gaining strength, I started cooking section of the fence. First of all, the old doors did bench-sized sections, it has begun assembly of metal structures of the fence. To do this, using grinders, clamps, and welding equipment. Metal sections brewed from a square tube 20x20. To make it convenient to attach the mesh and corrugated board to a square tube along the perimeter, welded metal band 20h4. In the middle part of the fence on the border of the grid and I welded corrugated strip 40h4 and strengthened its reinforcement of 12 mm.



At the bottom of the fence positioned deck, which is cemented, welded reinforcement of 6 mm. At the top pulled welded galvanized mesh 20h20h2, which also secured, welded along the perimeter of the armature.



Then finished the section firmly welded to the posts. Gates made a similar manner, and then all painted.

The design turned out light and durable. I was concerned that the fence would be to rattle during a strong wind, but at the last "storm" I had not even heard of.



Costs

If someone hired to build the fence would have to lay 3000-5000 rubles. per meter.
I build a fence cost about 1000 rubles. per meter.