Surface preparation for blind area, paths, etc.

Not one I'm in a state of permanent construction. And more and more often find myself thinking that I want something all at once, and hands - two or more for some reason does not grow. And therefore have to find different approaches to such a monotonous sometimes occupation as construction. Let's talk about the tracks and the blind area, about why they always need more hours and sometimes just made the day after tomorrow ...

Construct we build, we build, we build, and all this time go back and forth around the future home of the sand pile to the pile of rubble and back. Nailed a couple of boards - a smoke break. Put two bricks - lunch. Unproductive, is not it? That's what I once thought - and how to improve productivity without compromising the health of yourself, dear?

Thought he remembered the past experience and found that the solution is lying on the surface! And the decision is based on the very nature of most intermediate operations, such as running back and forth (which constitutes the lion's share of work on site).

So, you have to plan far into the future is a device blind area and the various tracks on the site. And you want to do this last foray, so to speak - when all the major will already be done. Even now, glancing back, I realize how wrong by reading the same way! Want an explanation? They will, patience.


Neutrambovannaya sandy foundation

As is known, the device is blind area or track consists of several stages: surface preparation, laying of geotextile, filling with sand (or sand-gravel mixture), and then dumping rubble with obligatory plugging each layer and have a lot of different nuances. But not now about the intricacies of speech, but about such an interesting stage of the work as dumping and tamping.

I hope I have enough you are interested to ensure that you have agreed to prepare ostvov blind area or the basis for a track right now, not later, when construction is over (which in itself is questionable, given the constant itching in hands). Therefore, if so, take a few tips:
When you are busy to build something with one (eg, hemming floor) - Take a break just a half hour and prepare two feet under the surface of the blind area - remove any excess land sroyte bumps, etc. You'll see that within a few days the whole surface of a blind area will be ready . And that's without much effort, because the whole secret - a competent switch attention from one task to another;
Perekurivaete? As a general rule, before to give myself a smoke break, bring two buckets of sand and poured them into place. The results are astounding - it turns out, we tend too often to rest, according to the count brought buckets of sand! And it is again without any extra effort - just a small commitment to smoking breaks;
Relax? Do not sit just like that - instead, walk around the places, paved with sand. Regular trips to such places in the future work better than compactors;
The next day in the forecast of rain? Then leave other jobs and switch to the backfilling sand - sand in the rain very well compacted, without your intervention;
Rain does not happen? It's okay - we just recall the item 4 and quietly utrambuem.


Like, trampled - soon everything will be all fine!

As you can see, the secrets are simple, they are even hard to call secrets, actually. The only thing I can say in conclusion - this method is repeatedly tested by personal experience and gives great results. The main thing in it - small obligations before you go to small concessions to the body. Good luck on the construction site!